24
English
ALARM CLOCK
At the set alarm time either the tuner will start playing for 1 hour, the beeper will
come on for 3 minutes or an entire CD will be played.
1 Keep SET· pressed for approximately 2 seconds, then
briefly press SET· twice.
y Either ALbEEP, ALCd or ALtun is displayed.
2 Press 3 or 4 if necessary repeatedly within
5 seconds to select the desired alarm signal until the
display shows either:
ALbEEP: the beeper will be the alarm signal,
ALCd: the CD will be the alarm signal, or
ALtun: the tuner will be the alarm signal.
y At the set time starts flashing and the
selected alarm signal will come on.
• You can deactivate the beeper for 24 hours by
pressing any key on the player.
• If you deactivate the alarm function by switching CD or
tuner play off with 9, CD or tuner play will restart
after 24 hours.
• To switch the alarm function on or off,
keep ESP pressed for approximately 2 seconds.
y is shown if the alarm function is on.
Notes: – If there is no CD inserted or no radio station tuned,
the beeper will be taken as the alarm signal instead.
– The alarm can only be heard if you disconnect the
headphones, and either connect speakers to the player,
or select the beeper as the alarm signal.
Alarm activation/deactivation
AZT9230/01.1 eng 30/10/00 11:03 Page 24
