English
11
Controls (illustrations on page 3)
Controls on the system and
remote control
1 STANDBY ON ECO POWER (2)
–switches the system to standby/Eco-power
stnadby/on.
2 DISPLAY/CLOCK
for CD .................displays the current track
number and total remaining time
(or current album and track
numbers for MP3 disc) during
playback.
for clock.............. sets the clock function
3 INTERACTIVE SOUND controls:
DBB ....................(Dynamic Bass Boost) enhances
the bass.
DSC..................... (Digital Sound Control) selects
sound characteristics: JAZZ/POP/
CLASSIC/ROCK.
4 USB port
– connects to external USB mass storage device.
5 SOURCE
– selects the respective sound source for CD/USB/
TUNER/TAPE/AUX.
– switches on the system.
6 Mode Selection
2; ...........................starts or interrupts CD playback.
9............................. stops CD playback or erases a
CD programme.
ALBUM/PRESET 4 3
for radio..............selects a preset radio station.
for MP3 disc .....selects an album.
TUNING 4 ¢
for Tuner .............tunes to radio stations.
for CD .................skips to the beginning of the
current/previous/subsequent
track.
................................. fast searches back and forward
within a track/CD.
for clock/timer adjusts the hours and minutes
for the clock/timer function
7 VOLUME (VOL -/+ )
– adjusts the volume level.
8 iR SENSOR
– infrared sensor for remote control.
9 Ta pe Deck Operation
RECORD● ...starts recording.
PLAY 2 ............ starts playback.
SEARCHà / á fast rewinds/winds the tape.
STOP•OPENÇ0
................................. stops the tape; opens the tape
compartment.
PAUSEÅ .......interrupts recording or playback.
0 OPEN•CLOSE3
– opens/closes the CD door.
AUX jack (located on the back panel)
– connects an external source (3.5 mm socket)
HEADPHONE (located on the back panel)
–connects headphones
Controls available on the remote
control only
! CLOCK
– sets the clock function.
@ AUX
– selects AUX sound source
# PROG
for CD .................programmes tracks and reviews
the programme.
for Tuner .............programmes tuner stations
manually or automatically.
$ REPEAT
– repeats a track/disc/all programmed tracks.
% SHUFFLE
– plays CD/MP3 tracks in random order.
^ CD/USB/TUNER/TAPE
– selects the respective sound source.
& TIMER
– sets the timer function.
* SLEEP
– activates/deactivates or selects the sleeper time.
( DISPLAY
for CD .................displays the current track
number and total remaining time
(or current album and track
numbers for MP3 disc) during
playback.
) MUTE
– interrupts and resumes sound reproduction
PG 001-024_MCM204_12-Eng 6/17/08, 11:2611
