Listening to a CD
Head units display
When the separately sold display is connected to this
unit, the listed information will appear on it.
Information display
These are the basic steps necessary to play a
CD with your DVD player. More advanced CD
operation is explained starting on the next
page.
1 CD indicator
Shows when a CD is playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
3 Track number indicator
Shows the track currently playing.
Basic operation of CD
1 To perform fast forward or reverse,
press and hold m or n.
# This is fast forward and reverse operation only
for the track being played. This operation is can-
celed when the previous or next track is reached.
# If you select ROUGH, pressing and holding
m or n enables you to search every 10 tracks
in the current disc. (Refer to Selecting the search
method on page 38.)
2 To skip back or forward to another
track, press o or p.
Pressing p skips to the start of the next
track. Pressing o once skips to the start of
the current track. Pressing again will skip to
the previous track.
# If the remote control is set to DVH mode, o
and p are assigned to other functions. Use
m and n instead for the DVD mode functions
controlled by o and p.
3 To stop playback, press g.
# When you stop CD playback by pressing g,
that location on the disc is memorized enabling
playback from that point when you play the disc
again.
# To resume playback, press f.
# If the remote control is set to DVH, g does
not operate.
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
2 Press NUMBER buttons to enter the de-
sired track number.
! To select 3, press 3.
! To select 10, press 1 and 0 in order.
Playing CDs
En
34
Section
08
