A SERVICE OF

logo

7
DURING INSTALLATION
Ÿ 1. Be aware of all moving parts and avoid close proximity to any pinch
points.
Ÿ 2. Disconnect power at the control panel before making any electric
service connections. Connection location for controls and safety
equipment can be found on the wiring diagram, and in this manual.
Ÿ 3. Know how to operate the manual disconnect mechanism.
Ÿ 4. Adjust the open and close force adjustment on the control board in
each direction to the minimum force required to operate the gate
smoothly. DO NOT
increase the force adjustment setting to
makeup for rough spots in gate travel - FIX THE GATE
INSTEAD!
Ÿ 5. Locate the controls at least 10 feet from the moving gate so that the
user can observe the gate operation, but is not able to come in
contact with the gate while operating the controls.