A SERVICE OF

logo

Open as PDF
next previous
1.CD Gain Selector
The CD Gain Selector will increase or decrease the input sensitivity of the CD input. We
suggest if your source unit's pre-amp voltage is 4V or greater, set the sensitivity switch to
HI. If your source unit's pre-amp voltage is 2V-4V, set the sensitivity switch to MID. If your
source unit's pre-amp voltage is less than 2V, set the sensitivity switch to LOW.
2.Subwoofer Frequency Selector
The Subwoofer Frequency Selector is a built-in low-pass filter for the Subwoofer Output.
Generally, the low-pass filter can be set to 128Hz, then the subwoofer amplifier's low-pass
filter is fine tuned for the desired response.
Top Panel Functions
3.