BACK TO CONTENTS
Your new amplifier incorporates some or all of the following features:
Adaptive MOSFET Switching Power Supply
Fully Complementary Darlington Output Stage
AP III
Protection Circuitry (PC4200, PC4400, PC6800)
AM IV
Protection Circuitry (PC4800)
QBASS
™
Bass Boost (PC4200, PC4400)
QBASS PLUS
™
(PC4800, PC6600)
QBASS REMOTE
™
Compatible (PC4800, PC6600)
PowerLock
Speaker and Power Wire Connectors
Detented, Variable 3-way Internal Crossover
Non-Fading Sub Channel
Balanced Differential Input Stage
High Voltage Input Capability with Input Attenuation Switch
Gold Plated RCA Input and Output Connectors
Mixed Mono/Stereo Operation
3 Year Warranty when installed by an Authorized
PrecisionPower
Dealer
Completely Designed And Handcrafted In The USA
Specifications
Power Bandwidth: 4.5 Hz - 100 kHz
Total Harmonic Distortion: 0.02 %
Input Topology: Differential
Input Sensitivity: 150mv - 12 volts RMS
Input Impedance: 10k Ohms
Load Impedance (stereo) 2 - 8 Ohms
Load Impedance (bridge) 4 - 8 Ohms
Supply Voltage 11 - 15 volts
Damping Factor >500
Slew Rate >50 V/µS
Idle Current: PC4200 / PC4400 - 1.5 Amps
PC4800 - 3.0 Amps
PC6600 - 2.0 Amps
Continuous Output Power
PC4200 PC6600
25 WRMS x 4 @ 4Ω per channel 50 WRMS x 6 @ 4Ω per channel
50 WRMS x 4 @ 2Ω per channel 100 WRMS x 6 @ 2Ω per channel
100 WRMS x 2 @ 4Ω bridged 200 WRMS x 3 @ 4Ω bridged
PC4400
PC4800
50 WRMS x 4 @ 4Ω per channel 100 WRMS x 4 @ 4Ω per channel
100 WRMS x 4 @ 2Ω per channel 200 WRMS x 4 @ 2Ω per channel
200 WRMS x 2 @ 4Ω bridged 400 WRMS x 2 @ 4Ω bridged
FEATURES / SPECIFICATIONS
1
