ProForm PFTL16011.0 Manual

A SERVICE OF

next previous

7

1. Make sure that the power cord is unplugged.

Attach the Left Wheel Cap (103) to the Base

(105) with two #8 x 3/4" Screws (2).

Attach the Right Wheel Cap (not shown) to

the right side of the Base (105) in the same

way.

1

103

105

2

ASSEMBLY

• Tohireaservicetechniciantoassemblethis

product in your home, call 1-800-445-2480.

• Assemblyrequirestwopersons.

• Placeallpartsinaclearedareaandremovethe

packing materials. Do not dispose of the packing

materialsuntilyounishallassemblysteps.

• Theundersideofthewalkingbeltiscoatedwith

high-performance lubricant. After shipping, there

may be some lubricant on top of the walking belt

or on the shipping carton. This is normal. If there

is lubricant on top of the walking belt, wipe it off

with a soft cloth and a mild, non-abrasive cleaner.

• Toidentifysmallparts,seepage6.

• Assemblyrequiresthefollowingtools:

the included hex key

one adjustable wrench

one Phillips screwdriver

To avoid damaging parts, do not use power tools.