9
8. Insert the Book Holder (88) into the console as-
sembly; it may be helpful to rock the Book
Holder up and down as you insert it. Attach the
Book Holder with five 3/4" Black Screws (12);
start all five Screws and then tighten them.
See steps 4 and 6. Tighten the 3/8" x 4" Bolts
(6).
12
12
88
Console Assembly
12
8
7. Have a second person hold the console assem-
b
ly near the Right Upright (78). Remove the wire
tie from the Upright Wire (38).
Connect the Upright Wire (38) to the console
w
ire.
S
ee the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN THE POWER IS
TURNED ON.
Then, insert the connectors into
the Right Upright (78).
Set the console assembly on the Right Upright
(78) and the Left Upright (not shown). Attach the
console assembly with four 5/16" x 1" Bolts (5)
and four 5/16" Star Washers (9);
start all four
Bolts and then tighten them.
5
78
9
38
Console
Assembly
Console
Wire
Wire Tie
7
5
9
38
9. If necessary, press the Left Tray (33) and the
Right Tray (52) into the top of the console as-
sembly.
Console
Assembly
33
52
9
Console
Wire
