B – Command Line Interface
Show Config Command
B-74 59042-07 A
0
The following is an example of the Show Config Switch command:
SANbox2 #> show config switch
Configuration Name: default
-------------------
Switch Configuration Information
--------------------------------
AdminState Online
BroadcastEnabled False
InbandEnabled True
FDMIEnabled False
FDMIEntries 10
DomainID 19 (0x13)
DomainIDLock True
SymbolicName sw108
R_A_TOV 10000
E_D_TOV 2000
PrincipalPriority 254
ConfigDescription Default Config
ConfigLastSavedBy admin@OB-session5
ConfigLastSavedOn day month date time year
InteropMode True
Legacy Address Format False
1
The following is an example of the Show Config Threshold command:
SANbox2 #> show config threshold
Configuration Name: default
------------
Threshold Configuration Information
-----------------------------------
ThresholdMonitoringEnabled False
CRCErrorsMonitoringEnabled True
RisingTrigger 25
FallingTrigger 1
SampleWindow 10
DecodeErrorsMonitoringEnabled True
RisingTrigger 25
FallingTrigger 0
SampleWindow 10
ISLMonitoringEnabled True
1
Appears only if InteropMode is False.
