18
RADIO OPERATION
PLAYING THE RADIO
1.Press PWR to turn on the stereo.
2.Press
BAND to select the AM or FM
band.
AM 1 or AM 2 appears when
you select an AM band.
FM 1, FM
2
, or FM 3 appears when you select
an FM band.
Notes:
•Each time you press
BAND, the
radio tunes to the last station
selected in the current band and
memory group (see “Memory
Tuning” on Page 19).
• appears when an FM signal
is received in stereo.
3.Tune to the desired station in one of
the following ways.
Manual
Tuning:
Repeatedly press
TUNE or TUNE to tune down
or up the selected band.
Seek
Tuning:
Press
SEEK
or SEEK to tune to the next
lower or higher station.
Note:
If the stereo does not find a
strong station when seeking, it
searches the band again for weaker
stations. If no station is found, press
TUNE or TUNE to stop the
seek function.
4.Press
+ or – to increase or decrease
the volume as desired.
Notes:
•See “Adjusting the Controls” on
Page 16 for information about
changing the stereo’s other settings.
ST
12-2115a.fm Page 18 Wednesday, January 12, 2000 11:18 AM
