Connections & Setup
10 Chapter 1
R
L
A/V RECEIVER
CABLE OR
OFF-AIR
SIGNAL
TV/DVD BACK PANEL
OUT
LINE 1 IN
UHF/
VHF
AUDIO
L
DIGITAL
AUDIO
COAXIAL
VIDEO
R
(MONO)
AMPLIFIER WITH DIGITAL INPUT
DIGITAL
IN
TV
IN
TAPE
IN OUT
CD
IN
VCR
IN OUT
OR
TV/DVD
Dolby Digital
®
and DTS
®
Both Dolby Digital and DTS are audio formats used to record 5.1-channel audio signals onto the
digital track of film (while the film is being made). Both of these formats provide up to six separate
channels: left, right, center, left rear, right rear, and common subwoofer.
The disc will play 5.1-channel sound only if you’ve connected a DTS or Dolby Digital receiver or
decoder and if the original movie the disc was recorded from was encoded in the Dolby Digital or
DTS format.
Please Read This Before Using the DIGITAL AUDIO COAXIAL Jack!
This unit’s DIGITAL AUDIO COAXIAL jack is designed for a connection to a Dolby Digital or DTS receiver or
decoder.
Older digital equipment may not be compatible with the Dolby Digital bitstream. Such a connection can
create a high level of noise that may be harmful to your ears, and could damage headphones or speakers.
RECEIVER
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
DTS and DTS Digital Out are trademarks of Digital Home Theater Systems, Inc.
1
2B
2A
