115
Changing Camera Settings
Assigning a Function to the ADJ. Button
(ADJ. BTN. SET. 1/2)
Pressing the ADJ. button allows you to display the screens for setting the
exposure and white balance with a small number of button operations.
Using the [ADJ. BTN. SET. 1] or [ADJ. BTN. SET. 2] option allows you to add a
function that can be activated by pressing the ADJ. button.
To assign a function to either [ADJ. BTN. SET. 1] or [ADJ. BTN. SET. 2], follow
the steps below.
1. Disp lay the setup menu.
For detailed operation, see P.111.
2. Pr ess the " button t o select [ADJ.
BTN. SET. 1] or [ADJ. BTN. SET. 2],
and press the $ butt on then.
3. Pr ess the !" buttons to select
the desired setting .
4. Pr ess the M/O or # button.
5. If you pressed the # button in step
4, press also the M/O button.
This setting will be used until you change it.
Reference
For how to use the ADJ. button, see P.59.
Possible Settings Refer to
OFF *[ADJ. BTN. SET. 2] at the time of purchase -
ISO SETTING *[ADJ. BTN. SET. 1] at the time of purchase P.83
QUALITY (PIC/QUALITY) P.62
AF/MF (FOCUS) P.66
SHARP (SHARPNESS) P.70
PHOTOMETRY P.69
AUTO BRACKET P.72
CONT P. 8 9
IMAGE WITH SOUND P.78
