19
Chapter 2. Performance
Changing the beat of metronome
3
Hold down the [ (Rhythm)/Beat] button, and press the [+] or [-]
button.
The currently selected beat will be displayed.
If you hold down the [ (Rhythm)/Beat] button and press the [+] or [-] button,
the beat will change.
If you hold down the [ (Rhythm)/Beat] button and press the [+] and [-] buttons
simultaneously, the beat will go back to what it was before you changed it.
fig.disp-beat
Stopping the metronome
4
Once again press the [ (Metronome)] button, getting its indicator to go
dark.
The metronome will stop.
■
Changing the metronome and rhythm volume
The volume of the metronome and rhythm (p. 20) can be adjusted, with eight volume
levels available.
1
While holding down the [ (Metronome)] button, press the [+] or [-]
button.
The currently specified volume will be displayed.
Continue to hold down the [ (Metronome)] button, and press the [+] or [-] button
to sound the metronome or rhythm, and change the volume.
fig.disp-metrovol
Display
beat Display beat
2.2
2/2 6.4 6/4
0.4 Only weak beats 7.4 7/4
2.4 2/4 3.8 3/8
3.4 3/4 6.8 6/8
4.4 4/4 9.8 9/8
5.4 5/4 12.8 12/8
NOTE
It is not possible to change the
eat during song playback or
recording.
Correspondence between
beat and tempo display
Beat Tempo Value
2/2 =10–125
x/4 =20–250
x /8 =40–500
This is set to “4” when the
instrument is turned on.
HP-7/3_e.book 19 ページ ２００４年１月２６日 月曜日 午後５時１分
