PoE Injector RNWA-PoE-100 User Manual
3
Chapter 1
Chapter 1 Overview
Thank you for choosing the RNWA-PoE-100 PoE Injector. The Power over Ethernet
(PoE*) Injector is able to supply steady power to Powered Device (PD*) or PoE
Splitter over the Ethernet cable. The Ethernet equipment can work as a Power
Sourcing Equipment (PSE*) with the help of the RNWA-PoE-100 connection.
PoE technology allows the existing Ethernet infrastructure to transmit electrical power,
along with data, to remote IP endpoints over the Ethernet cables, which can greatly
save the cost of the external power cables. Your network can benefit from PoE
technology for it will ensure the normal working status of your network while keep the
existing Ethernet infrastructure secure.
*PoE: This technology describes a system to transmit electrical power, along with
data, to remote devices over standard twisted-pair cable in an Ethernet
network.
*PD: A device powered by a PSE and thus consumes energy. Examples include
powering IP telephones, wireless LAN access points, network cameras,
network hubs, embedded computers etc.
*PSE: A device (switch or hub for instance) that will provide power in a PoE setup.
1.1 Package Content
Before getting started, please verify that your package includes the following items:
Rosewill RNWA-PoE-100 PoE Injector
One Power Adapter
One Ethernet (CAT5 UTP) Cable
This User Guide
Note: Please make sure that the package contains the above items. If any of the
listed items are damaged or missing, please contact with your distributor.
