200Mbps Powerline Pass-Through Fast Ethernet Adapter KIT - RPLC-201PKIT- User’s Manual
-20-
Change NPW (Network Password)
The Change NPW button is used to remove a remote device from its existing
network by changing the NPW for the remote device. All devices are shipped with a
default NPW (“HomePlugAV”). Devices with the same NPW are located in the
same network.
Note:
Only devices that have their password verified can be removed from a
network by clicking Change NPW. Before changing a device‟s NPW,
click Enter Password to enter the device‟s password to achieve
verification.
If the device is found and has its password entered correctly, enter a new NPW
different from the existing network in the Set Network Password dialog box
displayed. Then, the device is successfully removed from the network.
If a device does not have its password entered, a “Not change!” message appears.
You need to click Enter Password to enter the device‟s password to achieve
verification first.
