Extended functions
38
Shooting modes
Using the Program mode
In Program mode, you can set most options, except the shutter
speed and aperture value, which the camera sets automatically.
1
Rotate the mode dial to
p
.
2
Set desired options.
(For a list of options, refer to page 46.)
3
Align your subject in the frame, and then half-press
[Shutter] to focus.
4
Press [Shutter] to capture the photo.
Using the DUAL IS mode
Reduce camera shake and prevent blurred photos with Optical
and Digital Image Stabilization functions.
Before correction After correction
1
Rotate the mode dial to
d
.
2
Align your subject in the frame, and then half-press
[Shutter] to focus.
3
Press [Shutter] to take the photo.
•
The Digital zoom and Intelli-zoom are not available in
d
mode.
•
The camera will optically correct photos only when the light source is
brighter than fluorescent light.
•
If your subject is moving rapidly, the photo may be blurry.
•
Set the Optical Image Stabilization option to reduce camera shake in
different shooting modes. (p. 28)
