1) Press the Zoom Rate button repeatedly until the desired
setting appears in the display.
Or press Zoom Rate, ˆ or ¤ to increase/decrease the scale
value.
Whenever you press Zoom Rate, following options display
in order.
NORMAL 100% makes a copy that is the same size as
your original.
ENTIRE 91%(
ˆˆ ¤¤
) reduces your copy slightly to ensure
that the whole image, out to all the
edges, is copied.
AUTOFIT pre-scans the original to determine where
its edges are, and then reduces or
enlarges the original to fit on the paper
you are using.
TWICE 200%(
ˆˆ ¤¤
) enlarges the original to 200%.
MAX 400%(
ˆˆ ¤¤
) enlarges the original to the highest
enlargement percentage.
HALF 50% (
ˆˆ ¤¤
) reduces the original to 50%.
MIN 25% (
ˆˆ ¤¤
) reduces the original to the lowest
reduction percentage.
CUSTO M 100%(
ˆˆ ¤¤
) lets you specify an exact reduction or
enlargement percentage between 25%
and 400%.
3) Press Enter/Select.
Chapter 6
Making a Copy
6-5
Changing Copy Setup
Chapter 6
Before making copies, you can change the contrast, resolution and
scale. Any change will take effective to every copy you will make.
To change Copy Contrast
1) Press the Contrast button.
2) Press ˆ or ¤ until the desired setting appears in the display.
You may choose NORMAL, LIGHTEN or DARKEN.
3) Press Enter/Select.
To change Copy Resolution
1) Press the Resolution button.
2) Press ˆ or ¤ until the desired setting appears in the display.
●
You may choose NORMAL, BEST or DRAFT.
3) Press Enter/Select.
To change Copy Size
Making a Copy
6-4
[ZOOM RATE]
¤
NORMAL 100%
06-M30UK(5-10 to 6-9) 5/22/00 3:24 PM Page 4
