13
Many of your TV’s functions are controlled through the menu function.
During the menu operation the following buttons are used.
u : To enter the menu function.
: To go back and to exit the menu function.
: To navigate up and down in the menus.
: To navigate forwards to the next screen or to
activate settings.
1. Press the MENU button to select main menu, select Picture using
ee
or
dd
buttons.
2. Press 1 to enter. Select and adjust to obtain the best picture
settings for your environment.
Text bright : Brightness of Teletext screen
MINIMUM / CENTRE / MAXIMUM.
Tint : Colour phase if NTSC equipment is detected.
■ Storing picture preferences
If you have altered any of the settings in the Picture menu you can
store them. You can be recall again later.
In the picture menu press
66
to select memory.
Press the 1 button, a tick appears in the box and the settings are
stored.
1. Press the MENU button to select main menu and using
55
or
66
select Sound.
2. Select and adjust to obtain the best sound settings for your
environment using
55
,
66
, 1 or 2.
3. Press MENU button repeatedly to exit.
■ Off-timer setting
The Off timer will switch the TV set into the standby mode when the
selected time has elapsed.
1. Press the MENU button to select main menu. Press
55
or
66
to
select Timer.
2. Press
1 to enter
OFF Timer.
3. Press
1 button, and highlight time setting column by pressing
the
55
or
66
buttons.
When the time setting column is selected its colour changes to yellow.
The time changes in 30 minute steps.The maximum time is 2:00hrs.
When you are ready to store your settings press the 1 button and
the setting column numbers colour changes to green. The tick
appears as shown above and its colour changes to yellow.
If you have set the off timer, then one minute before the TV switches,
a display appears on the screen.
4. Press the MENU button repeatedly to exit the menu.
✐
If the TV set is switched off by the Mains Switch
4
,
or you enter
the preset mode, the timer settings will be cancelled.
■ Child lock
You can prevent small children from operating the TV with the front
buttons of the TV set.
1. Press the MENU button and select main menu.
2. Press
55
or
66
to select Setting, press
1 to enter
Child lock
/ AV2 menu.
3. Press
55
or
66
to select Child lock, press
1 to select ON or
OFF.
The child lock mode will be reset to “OFF” when the TV set is
switched off with the Mains ON/OFF 3 switch.
■ Setting of AV2 input mode
If you use a VCR which has S-VHS, you should connect it to AV2 and
change the AV2 menu to S-VIDEO.
1. Press
66
to select AV2, press 1 or 2 to select S-VIDEO /
VIDEO.
2. Press MENU button repeatedly to exit.
MENU OPERA
MENU OPERA
TION -
TION -
Anologue channels
Anologue channels
Picture menu
