English - 17-
EXT2Out
By pressing
/
select EXT2 Output. Use
/
button, to set Ext-2 Out to TV, EXT1, EXT3, EXT4,
EXT5, EXT7 or PC.
Note: Only audio output is available for EXT-3,
EXT-6, EXT-7 and PC .The other options have
both audio and video outputs.
If currently watched source is analogue TV, a con-
nected device displays analogue TV source as well.
If this source is set to digital mode, connected de-
vice displays digital source. In order to avail this
function, EXT-2 Output should be set to TV/DTV.
DefaultZoom
By pressing
/
button, select Default Zoom.
You can set Default Zoom to Full, Panoramic, 4:3
or 14:9 Zoom by pressing
/
button.
BlueBackground
By pressing
/
button, select Blue Background.
Press
/
button to set Blue Background as on or
off.
MenuBackground
By pressing
/
button, select Menu Back-
ground.Youcanchangemenubackgroundto Trans-
lucent or Opaque by pressing
/
button.
MenuTimeout
By pressing
/
button, select Menu Timeout.
Press
/
button to change menu timeout to 15 sec,
30 sec or 60 sec.
Teletext Language
By pressing
/
button, select Teletext Language.
Press
/
button to change Teletext Language to
West, East, Turk/Gre,Cyrillic, or Arabic.
Install Menu
Channel 36
Colour System AUTO
Sound System BG
Fine Tune 0
Search 423.25
Store Program
INSTALL
Program
By pressing
/
button, select Program. Press
/
button to select the program number. You can also
entera numberviadigitbuttonson theremotecontrol.
There are 100 program storage between 0 and 99.
Band
Band can be selected either “C” or “S” by press
/
button.
Channel
Channel can be changed by
/
button or Digit But-
tons.
Colour System
By pressing
/
button, select Colour System.
Press
/
button to change the colour system to
PAL,SECAMorAUTO.
IfSound System isset toI, SECAMisnotavailablefor
the Colour System.
NOTE: In EXT mode, you can choose NTSC 3.58,
NTSC 4.43 or PAL60 as well.
SoundSystem
By pressing
/
button, select Sound System.
Press
/
button to change the sound system to BG,,
I, DK, Lor LP.
FineTune
By pressing
/
button, select Fine Tune. Press
/
button to adjust the tuning.
Search
By pressing
/
button, select Search. Press
/
button to start program searching.You can also
enter the desired frequency via digit buttons when
search item is highlighted.
VCR
This item can be seen in all modes except YPbPr,
HDMIand PC.
If you want to watch a VCR source from one of these
modes, then it will be better to set VCR mode “on”.
For this, while the cursor is on this item press the
/
buttons to set it “On”.
If you want to watch a DVD , then you must set this
item “Off”.
Store Program
By pressing
/
button, select Store Program.
Press “
”or “OK” button to store the adjustments.
“Program Stored” will be displayed on the screen.
01-ENG-42781W-MB26-UKIDTV-BSI-1050UK-(WSUB-ALO-ECOPIP)-SANYO-C2-10050046-50110543.p6510.07.2007, 12:5417
