FROM ANT.
OUT TO TV.
FROM ANT.
OUT TO TV.
FROM ANT.
OUT TO TV.
SAT.
FROM ANT.
OUT TO TV.
RECEIVER
VCR
CABLE BOX
TV BACK
❸
BASIC HOOKUP METHODS
Use one of these methods to connect a signal to your TV. Select 1a—if you have cable
service and a VCR, 1b—if you have a cable box and a VCR, 1c—if you have an outdoor or
indoor antenna and a VCR, or 1d—if you have a satellite dish and a VCR. Connect your
cable or antenna directly to the TV if you don’t have any optional accessories.
CATV FRANCHISE NOTE: Cable
companies, like public utilities,
are franchised by local govern-
ment authorities. To receive
cable programs, even with
equipment which is capable of
receiving cable channels, the
consumer must subscribe to the
cable company’s service.
❷
➊
d
➊
b
➊
a
75 OHM Terminal
Use the 75 ohm terminal to
connect a VCR, cable, cable
box, outdoor/indoor antenna
or satellite receiver directly to
the TV.
Cable with VCR and TV
Cable with Cable Box, VCR, and TV
Satellite Dish with Receiver, VCR, and TV
➊
c
Outdoor or Indoor Antenna with VCR and TV
❷
❷
VCR
VCR
VCR
❷
❸
QuickTips
■
The TV will automati-
cally select the
correct Antenna mode
for the type of signal
you connect.
■
TV will switch off
automatically after 15
minutes if there is no
signal reception
(cable out or station
not broadcasting).
Exception—When the
Game/Video mode is
selected, the TV will not
automatically switch off
when signal reception
has stopped for 15
minutes.
Need help?
visit our website at
www.sanyoctv.com
or Call 1-800-877-5032
See page 10, Using
the Audio Output
jacks.
TV BACK
TV BACK
TV BACK
