Connecting Other Equipment
23
23
You can connect a VCR, S-VHS VCR, Satellite Tuner, PAY TV Decoder, DVD or Camcoder to
this TV via the AV terminals and the SCART terminal.
■ Depending on the type of video tape or connected AV equipment being used, it may be
necessary to select colour system. In this case, press the Recall/Colour System button
and select a suitable colour system. Colour system setting for AV position is automatically
stored in the memory.
■ By pressing the Stereo/Mono button repeatedly, you can select the sound track L
(left), R (right) or L/R.
■ You can select and return to a TV programme by selecting any of the TV position while
watching a playback from a VCR, DVD, etc.
■ Select “AV2” mode by pressing the TV/AV Selector for watching.
S-Video Connection through Scart Terminal Adaptor
AV1
AV2
AV3
AUDIO MONITOR OUT
L
R
AV5
Y
CB
CR
AUDIO
L
R
L
R
VIDEO
L
R
DVD INPUT
DVD
R-AUDIO - L/MONO VIDEO S-VIDEO
When you use a S-VHS VCR not provided with the 21-pins scart terminal, connect it with the
AV2 terminal using Scart Terminal Adaptor, and set AV2 status on “S-Video” (Refer to the
Setting Menu on page 16).
S-VHS VCR
Scart Terminal Adapter
(Supplied with TV set)
PLAYBACK
DVD Player etc.
To audio output
To S-Video output
Important Note:
Do not input to both S-Video and RCA video input jack of the Scart Terminal Adaptor at the
same time to avoid signal mix and distorted picture.
S-Video Jack
Inst. Manual_N2WW(UE2-A) 5/30/05 3:08 PM Page 23
Downloaded From TV-Manual.com Manuals
