36
SETTING
SCREEN SAVER FUNCTION
Displaying a still picture (non-movement) for a long time cause afterimage (ghost) on the screen. To neutralize the remaining
image, the Screen saver function (3 modes) is provided. Use the function to protect your Plasma Monitor.
SELECTING SCREEN SAVER
Press the MENU button and the On-Screen Menu will appear.
1
Press the ed buttons to select "Screen saver menu" and then
press the OK button. "Screen saver menu" will appear.
2
1
2
PICTURE ROTATION
3
Press the 78 buttons to select "On" and then the ed buttons
to select "Cycle time", and press the 78 buttons to select a
desired cycle time.
Cycle time : 15 Min / 30 Min / 60 Min
Press the ed buttons to select "Dot", and press the 78 buttons
to select moving distance.
Dot: 4 / 8 / 16 (dots)
The screen saver "Pic rotation" automatically changes the display
position.
Press the ed buttons to select either the screen saver "Pic
rotation" or "White pattern". And follow the instructions below to
set up each screen saver
NOTE :
Priority is given to the Power save function over the Screen saver function if
the power save function is set "yes".
SCREEN SAVER MENU
NOTE :
Dot cannot be selected when the input signal is "1080i".
WHITE PATTERN
The screen saver "White pattern" displays a blank white screen.
1
2
Press the ed buttons to select "Display time", and then press
the 78 buttons to select a desired display time of a blank white
screen.
Display time : 10 Min / 30 Min / 60 Min
Select "White Pattern" with the ed buttons and then press
either of the 78 button to display a blank white screen for the
specified time.
To return to the normal screen before the specified display time
passes, press either of the 78 button again.
