Getting Started
14
1
A Squeeze in the release lever to un-
lock the ADF. Then lift up the
ADF cover.
B While holding up the ADF cover,
insert the manual pocket into the
slot provided.
C Push down on the left and right
sides of the ADF cover to close it.
Make sure it clicks firmly into
place.
D If you wish to install the optional
handset, fix the handset holder as
shown.
Installing the Document Output Tray and
Document Tray
A Identify the document output
tray (it is bigger than the other
tray).
B With the frosted side facing up,
bend the document output tray to
insert it into the lower two slots
provided.
C Check the orientation of the docu-
ment tray, then bend to insert it
into the lower two slots provided.
TKSX030N
TKSX040N
TKSX050N
TKSX060N
