User’s Manual >>
47
Protecting Images
Set the data to read-only to prevent images from being erased by
mistake.
Protecting Images
1. Slide the mode switch to [ ].
2. Select the image that you want to
protect with the / buttons.
3. Press the MENU button.
The playback menu is displayed.
4. Select [Protect] with the /
buttons, and press the SET button.
5. Select [Single] or [All] with the /
buttons, and press the SET button.
6. Select [Set] with the / buttons,
and press the SET button.
Protect is executed and the camera
returns to the playback mode.
The protect icon [ ] is displayed with protected images. When
[All] has been selected, [ ] is displayed with all the images.
