Preparation
Preparation
15
Setting the Date and
Time
Available modes:
TAPE-CAMERA, CARD-CAMERA
Example: Setting the date to 2 June 2003 (2. 6.
2003) and the time to 10:30 am (10:30).
Note:
• Before performing the steps below, make sure
that the lithium battery has been installed (see
page 14).
SET button
1 Hold down the Lock button
and set the Power switch to
CAMERA.
2 Press the MENU button until the menu
screen appears.
3 Press the SET button.
CLOCK SET
DISPLAY
SETTING
12H 24H/
RETURN
120
000:
02.1.
Lock button
4 Press l or m to select “2” (day), then
press the SET button.
5 Press l or m to select “6” (month),
then press the SET button.
6 Press l or m to select “2003” (year),
then press the SET button.
7 Press l or m to select “10” (hour), then
press the SET button.
8 Press l or m to select “30” (minute),
then press the SET button.
• The internal clock now starts operating.
9 Press the MENU button to turn off the
menu screen.
Note:
• If the date and time have been set, the SETTING
1 screen (T) appears in step 2. Select
“SETTING” in the CLOCK SET screen (P) using
the Operation button and SET button.
000
:
6 2002.2.
SETT ING
0 00
:
SETT ING
6 2003.2.
10 00
:
SETT ING
6 2003.2.
10 30
:
SETT ING
6 2003.2.
Power switch
MENU button
Operation button
VL-NZ100H-009-018 02.2.14, 9:58 AM15
