Operating Instructions
|
2 Press the “EQ./PROG.” button once. “01” will flash on the display.
3 Select with the “SKIP/SEARCH 8” or “SKIP/SEARCH 7” button the directory holding the
first title that you wish to program.
4 Press the “EQ./PROG.” button once again. The title number “000” will flash on the display.
5 Select with the “SKIP/SEARCH 8” or “SKIP/SEARCH 7” button the desired title within the
selected directory.
6 Press the “EQ./PROG.” button once again to program the selected title.
7 Repeat steps 3. to 6. until all music titles for your compilation have been programmed in
the desired sequence. Up to 64 tracks can be programmed in this manner.
8 Press the “PLAY/PAUSE” button once to start playback of the programmed compilation
of titles.
To end playback of the compilation press the “STOP/OFF” button once. The programmed
compilation continues to be stored and the display continues to indicate “PROG”.
To renew playback of the programmed compilation press the “PLAY/PAUSE” button once
again.
To switch off the program function press the “STOP/OFF” button twice during playback. This
ends the program function, “PROG” is faded out on the display and the programmed compila-
tion of titles is deleted.
The player is automatically transferred to STOP mode after all programmed titles have been
played. The programmed tracks continue to be stored until …
• You
open the CD compartment
• You
switch off the player by depressing the “STOP/OFF” button.
• The
MP3-CD player is automatically switched off after 30 seconds in STOP mode.
9.8. Selecting tracks by their name
With MP3-CDs it is possible to search for tracks on the loaded MP3-CD by entering the begin-
ning of the track name.
