10
Basic Operations
Playing a CD
— Normal Play
Do the procedure below to play a CD starting
from the first track.
b B x
mM
b B x
mM
x
.>
Xz
u
+
–
Z
m
M
4
VOLUME
CD ./>
m/M
3 1,2
CD x
1 Press CD EJECT Z and place a CD on
the disc tray.
The disc tray opens.
2 Press CD EJECT Z again to close the
disc tray.
3 Press CD.
“CD” appears.
4 Press CD u.
Playback starts.
1 041
Track number Playing time
To Do this
Stop playback Press CD x.
Pause Press CD u. Press again to
resume playback.
Select a track During playback or pause,
press CD . or CD >
repeatedly until you find the
desired track.
Locate a desired
point in a track
During playback, press down
CD m or CD M until you
find the desired point.
Remove or replace
the CD
Press CD EJECT Z.
Adjust the volume Turn VOLUME.
Tips
• If you press CD u when the power is off, the
system automatically turns on and the CD starts
playing if there is a CD on the disc tray (One Touch
Play).
• To switch to the CD while listening to another
source, press CD u. The CD will automatically
start playing (Automatic Source Selection).
• “NO DISC” appears in the display if there is no CD
on the disc tray.
Place with the
label side up.
When you play
a CD single
(8 cm CD),
place it on the
inner circle of
the tray.
?/1
(Power)
