ICD-SX700 4-127-576-11(1)
50
GB
4 Press or to select “ON,”
then press .
5 Press (stop) to exit the menu
mode.
6 Connect other equipment to the IC
recorder when the IC recorder is in
the stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment
to the
(microphone) jack of the IC
recorder using an audio connecting
cable*.
“SELECT INPUT” appears in the display
window.
7 Press or to select “AUDIO
IN,” then press .
8 Press (record/pause) to start
recording.
“ ” ashes and the IC recorder
enters the recording pause mode.
9 Start playback on the component
connected to the IC recorder.
“ ” appears on the display and
synchronized recording starts.
The synchronized recording pauses
when no sound is detected for more
than 2 seconds, and “
” ashes.
The IC recorder starts recording again as
a new message when sound is detected.
Notes
During synchronized recording, you cannot
divide a recording message (page
42), you
cannot pause recording (page
28), you
cannot record with the VOR function or
you cannot record with the pre-recording
function.
Depending on the equipment connected to
the IC recorder, the synchronized recording
function may not operate properly due to a
difference in the audio input level.
