20 Advanced Operation
Further Programme Preset menu
The ‘Further Programme Preset’ option in the ‘Manual Set Up’ menu allows you to obtain a better
picture if there is interference, set the volume level of an individual channel, fine tune the TV and
set up a channel for viewing signals from a Decoder.
With the ‘Further Programme Preset’ option highlighted, press b to enter the ‘Further Programme
Preset’ menu. Press v or V to highlight the channel number you require. Press b repeatedly to
select one of the following options:
(a) ATT (RF Attenuator). This allows you to improve the picture if there is interference from other
channels. Press v to select On. Press OK to store.
(b) VOL (Volume Level Offset). This allows you to set the volume level for an individual channel.
Press v or V to adjust the volume level over a range of -7 to +7. Press OK to store.
(c) AFT (Automatic Fine Tune). This allows you to fine tune a channel. Press v or V to select On.
Alternatively, press v or V to manually adjust the tuning frequency over a range of -15 to +15.
Press OK to store.
(d) DECODER. This allows you to set a channel for viewing scrambled signals (e.g. from a pay
TV decoder). Press v or V to select AV1 or AV3 depending on which socket is used to connect.
Press OK to store. The unscrambled signal now appears on the selected channel.
29FQ76 B5 Part 5 GB.fm Page 20 Tuesday, May 7, 2002 11:55 AM
