35
SETUP Setup SETUPSETUP SETUPSETUP
Notes on Using This Connection
To Do This ... Do This ...
Watch the DVD player Press TV/VIDEO repeatedly to select the DVD input (VIDEO 5 in the
illustration).
Set up the TV remote control
to operate the DVD player
If you have a non-Sony DVD player, you must program the remote control.
See “Programming the Remote Control” on pages 47-48.
Activate the TV remote
control to operate the DVD
player
Open the outside cover, as shown on page 46. Then set the A/V slide switch
to the position you programmed for the DVD player.
Control DVD functions with
the TV remote control
See “Operating a DVD Player” on page 59.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on page 90.
✍ You cannot record the signal from any equipment connected into the Y, PB,
P
R jacks.
34XBR.book Page 35 Monday, May 19, 2003 8:44 AM
