29
Adjusting Your Setup (MENU)
How to use the menu
Move the button
joystick (
) up,
down, left or right
to select the desired
item.
Press the button
joystick (
) to
confirm the selection
and/or go to the next
level. You can also
press ENTER on the
remote to do this.
Press MENU to display
the menu.
To
Adjust the setting value
Move to the next/previous menu level
Cancel the menu
Other menu operations
Tips
• If you want to exit from Menu level 2 to Menu level 1, move
up or
down until the return icon (3) is highlighted, then press
or ENTER.
• The MENU, ENTER, and
2
+/– buttons on the TV can also be used for
the operations above.
Note
• If more than 60 seconds elapse between entries, the menu screen
automatically disappears.
Press/Move
Move
up, down, left or right.
Move
left or right.
Press MENU.
30
Adjusting Your Setup (MENU)
Select
either “DRC1250“ or “DRC100“.
either “DYNAMIC“, “STANDARD“, “HI-FINE“, “PERSONAL“*, or “ADJUST“.
either “DYNAMIC“, “DRAMA“, “SOFT“, “PERSONAL“*, or “ADJUST“.
either “a VIRTUAL“, “TruSurround“, “SIMULATED“, or “ OFF“.
either “ON“ or “OFF“.
Changing the
“A/V
CONTROL” setting
The “A/V CONTROL
” menu allows you
to adjust the picture and sound settings.
1
Press MENU.
2
Move
up or down to
select
, then press .
3
Move
up or down to
select either “DRC-MF”,
“PICTURE MODE
”, “SOUND
MODE”, “SURROUND”, or
“DIGITAL IN“, then press
.
4
Move
up or down to
select the desired option,
then press
.
* When the “PERSONAL” mode is selected, the last adjusted pictur
e/sound
settings from the “ADJUST” option ar
e received (see page 31).
MENU
Tip
• For details on the options under the
“DRC-MF
“, “PICTURE MODE“/
“SOUND MODE“, “SURROUND“ and “DIGITAL IN“ modes, see pages
15, 14, 22 and 32 respectively.
To return to the normal screen
Press MENU.
