22
III. Print Film
(Cartridge Back-/Spine Print)
It is recommended to print in positive type follo-
wing information with white ink on the cartridge:
Spine: artist name and disc title.
Backside: artist name, disc title, catalogue num-
ber, track titles and durations, etc.
The MD Logo shall not be inserted, as it already
appears on the lower cartridge.
Print location for the spine is on the cartridge
edge opposite to the loading end.
During preparation of the print film please mind
the following:
•
Combine spine- and backside typesetting on one film.
• Use coated positive screenprinting line films
(min. line width 0.15 mm, high density, emulsion
side up); positioning marks must be located out-
side the print area.
• The films must not reveal damage of any kind
and must be packed in such a way so as to pre-
vent folding or creasing (roll container or carton).
• Please don't encircle the printing area on the
film.
Character size min. 5pt
min. linewidth 0.15mm
WARNING: All Rights Reserved.
1. EMOTIONS
2. AND YOU DON'T REMEMBER
3. CAN'T LET GO
4. MAKE IT HAPPEN
5. IF IT'S OVER
6.
7. SO BLESSED
8.
8. YOU
9. TILL THE END
9. OF TIME
10. THE WIND
