242
Multi Program 2
Chapter 1 MVS-8000 Functions
Differences Between Multi Program 2 Mode and
Standard Mode
The differences from operation in standard mode are as follows.
Item Main Sub
Keys
a)
Keys 1 to 4 can be used Keys 2 to 4 only can be
used
Wipes
(background)
Patterns Same as standard mode • Only standard patterns
can be used
• Pattern mix is not
possible
Modifiers Same as standard mode • Pairing, modulation,
spring, spiral, and split
cannot be used
• Edge fill mattes are
single-color only
• Replication can be
selected from four
patterns
Wipes (key) Same as wipes (background) for sub
DME wipes Use Can be used Cannot be used (Can be
used, with a setting
change)
Patterns for 1
channel
For a dedicated interface, each of main and sub can be
used.
For the SDI interface, only one of main and sub can be
used.
Patterns for 2
channels
Only one of main and sub can be used
(For each M/E, the number of DMEs that can be used is
the same as in standard mode.)
Patterns for 3
channels
Backgrounds Wipe edge fill matte
(including color mix and
other settings in the Matte
Adjust menu)
Wipe edge fill matte
(single-color only)
Modifiers Same as standard mode Wipe border colors are
single-color only
Transitions Key priority Cannot be used
Transition
preview
Cannot be used
Preset color
mix
Color matte or video signal
selected on the utility 2 bus
Color matte only
Snapshots Cross-point
hold
Utility 2 cannot be set Utility 3 is added. BKGD
A/B and Key1 cannot be
set.
Control from an editor Same as standard mode Cannot be used
