32
GB
Programming a
Series of Commands
on the Component
Select Buttons
As with the SYSTEM CONTROL
buttons, you can also programme
a series of operating commands
for the Component Select buttons
(up to 16 steps).
To execute the commands
programmed on a Component
Select button by the System
Control function, press the button
for more than 2 seconds.
Notes
• When you press the button for less
than 2 seconds, it works as a normal
Component Select button, and the
programmed function does not work.
•
See also “Tips for programming the
System Control functions” on page 31.
Example: To programme the
procedure on page 29 for the
VCR Component Select button
1 Press and while holding
SET, press the VCR
Component Select button.
SET
SATDVDTV CBL
TAPE
CDVCR
1
VIDEO1
2
VIDEO2
3
AUX
4
TUNER
5
CD
6
TAPE
7
MD
8
TV
9
PHONO
0
DVD
GUIDE MENU
TOOLS
SYSTEM CONTROL
AMP
ENT
OK
ABCD
1
-/--
RETURN
ANALOG
DIGITAL
PROGRAM
1 2
1,3
2
The SET indicator and the VCR
Component Select button lights
turn on.
If a Control Programme
function (Component Macro)
has already been set on the
button, the button flashes
twice. The setting procedure is
automatically cancelled.
2 Set the Control Programme
function.
With this example, press the
buttons in sequence as below:
You can programme up to 16
consecutive steps on each of
the Component Select buttons,
including the first step of
pressing to select a Component
Select button.
3 Press SET to complete the
programming.
The VCR Component Select
button light turns off.
SET
SATDVDTV CBL
TAPE
CDVCR AMP
