16
To view DVD video using the DVD Player installed on a memory card (8MB)
(for PlayStation
®2), you must insert the memory card (8MB) (for PlayStation®2)
into a MEMORY CARD slot of the PlayStation
®2 console.
Some DVD remote control functions will not work if you use DVD Player
software earlier than version 2.00. Refer to the PlayStation®2 console instruction
manual for details on how to check the version of your DVD Player software.
For PlayStation
®
2 consoles of model numbers SCPH-30001 and SCPH-35001 GT,
you must install DVD Player (ver 2.00), or later, on a memory card (8MB) (for
PlayStation
®2) to activate all DVD remote control functions.
For detailed installation instructions, see “Installing the DVD Player on a
memory card (8MB) (for PlayStation®2)” on pages 14-15.
z
Playing a DVD video
1 Insert the memory card (8MB) (for PlayStation®2) containing the
installed DVD Player into any MEMORY CARD slot of the
PlayStation®2 console.
2 Press the MAIN POWER switch on the PlayStation®2 console rear
to turn the console on.
3 Press the 1 (standby)/RESET button.
4 Press the A (open) button.
5 Insert the DVD video you would like to play into the disc tray
with the label side facing up (data side down).
6 Press the A button.
The disc tray will close and playback will begin.
Notes
• Do not remove the memory card (8MB) (for PlayStation®2) containing the DVD
Player before playback of the DVD video begins.
• With some discs, playback will not begin immediately, but a Title menu or DVD
menu will be displayed.
• After the DVD video has finished playing, press the A button on the console to
eject the disc and display the browser screen.
• If the power is turned off during playback, any optional settings you have made
will be lost.
Viewing a DVD video
