5
GB
OUT
SWITCHED AC OUTLETS
REAR SPEAKERSCENTER SPEAKER
FRONT SPEAKERS
PHONO CD DAT/MD TAPETUNER
REC OUT INREC OUT ININININ
TV LD VIDEO 2 VIDEO 1 MONITOR
VIDEO
OUT
VIDEO
IN
AUDIO
OUT
AUDIO
IN
VIDEO
OUT
VIDEO
IN
AUDIO
OUT
AUDIO
IN
VIDEO
IN
AUDIO
IN
VIDEO
IN
AUDIO
IN
OUTOUTIN IN IN IN
OUT 2 OUT 1
5.1 INPUT
FRONT REAR CENTER
WOOFER
SURROUND OUT
REAR CENTER
WOOFER
INPUT
DIGITAL
4
DIGITAL
3
DIGITAL
2
DIGITAL
1
AC-3
RF
OUTPUT
DIGITAL
BYPASS INPUT
FRONT REAR CENTER
WOOFER
LL
RR
OUTPUT
FRONT REAR CENTER
WOOFER
LL
RR
y
ç
ç
ç
ç
ç
ç
ç
ç
ç
ç
ç
ç
ç
ç
Getting Started
Connecting an amplifier with 5.1 ch inputs (such as the Sony TA-VA8ES/TA-VA70, etc.)
The arrow
ç
indicates signal flow.
Notes on connection
• Do not connect the mains lead to a mains or press the
U (POWER) switch before completing all
connections.
• The cable connectors should be fully inserted into the
jacks. Loose connection may cause hum and noise.
• Jacks and plugs of the connecting cords are color-
coded as follows:
Yellow jacks and plugs: Video signal
Red jacks and plugs: Right audio channel
White jacks and plugs: Left audio channel
You can use either red or white cables to connect the
centre speaker and sub woofer.
* If your DVD player has a COAXIAL DIGITAL OUTPUT,
we recommend connecting the DVD player’s COAXIAL
DIGITAL INPUT to the this unit’s DIGITAL INPUT 4
(COAXIAL IN) instead of making the optical connection
shown above.
** If your LD player has an optical digital output, connect it
to one of the DIGITAL INPUT 1~3 jacks on this unit.
This connection can be used together with the AC-3 RF
connection.
TA-VA8ES/TA-VA70
SDP-EP90ES/EP70
(continued)
DVD player, etc.*
LD player**
CD player, etc.
DAT/MD deck
to mains
to mains
from AUDIO/
VIDEO OUT
from AUDIO/
VIDEO OUT
from OUTPUT
from OUTPUT
to INPUT
to OPTICAL DIGITAL INPUT
from OPTICAL DIGITAL OUTPUT
from COAXIAL DIGITAL OUTPUT
from OPTICAL DIGITAL OUTPUT*
from AC-3 RF OUTPUT
