A SERVICE OF

logo

Open as PDF
next previous
14
3
1
2
Setting the IP Address
of the Camera
“DHCP Enabled Yes”
is displayed.
When using Windows XP
“Assigned by DHCP”
is displayed in the [Local Area
Connection Status].
Set the IP address item of
the camera to “Obtain an
IP address automatically” in
accordance with the settings
of the computer.
Go to step 9-b. (Page 16)
“DHCP Enabled No”
is displayed.
When using Windows XP
“Manually Congured”
is displayed in the [Local Area
Connection Status].
Assign the appropriate IP
address in accordance with
the settings of the computer.
Go to step 9-a. (Page 15)
8
Click the camera whose IP address you want to set.
The IP address of your camera has been set
to the following at the factory.
IP address 192.168.0.100
The operations required after this point depend on the type of address displayed in step 6 of
Conrming the Settings of the Computer
1
on page 6.