18
To cancel Program Play
Press MODE until “PGM” disappears from
the display.
To check the order of tracks
before play
Press DISPLAY/ENTER•MEMORY.
Every time you press the button, the track
number appears in the programed order.
To change the current program
Press x once if the CD is stopped and twice
if the CD is playing. The current program
will be erased. Then create a new program
following the programing procedure.
When playing MP3 files
• In TRACK mode, you can program up to
20 files the same as you would for audio
CD tracks.
• In FOLDER mode, you can program up to
20 folders and play all tracks in the
programmed folder in the programmed
order.
Tips
• You can play the same program again, since the
program is saved until you open the CD
compartment.
• You can record your own program. After you’ve
created the program, insert a blank tape and
press z to start recording.
• The resume function doesn't work during
Program Play.
Playing order
Programed folder
Creating your own
program (Program Play)
You can arrange the playing order of up to
20 tracks on a CD.
MODE
Jog dial
1 Press x.
“CD” appears in the display.
2 Press MODE until “PGM” appears in
the display.
3 Turn the jog dial to select the track you
want to program, and press DISPLAY/
ENTER•MEMORY.
Repeat this step.
4 Press u to start program play.
On the remote
1 Press x.
2 Press MODE until “PGM” appears in the
display.
3 Press the number buttons for the tracks you want
to program in the order you want.
4 Press N.
Playing orderProgramed track
u
x
DISPLAY/
ENTER
MEMORY
