70
Labeling the preset stations
(continued)
7 Press CURSOR n to enter the
character.
The cursor shifts rightward and waits for
the input of the next character.
8 Repeat steps 5 to 7 to complete the
name.
If you made a mistake
Press CURSOR N or n until the
character you want to change flashes,
then repeat steps 5 to 7.
To erase the character
Press CLEAR. Each time you press the
button, the character at the position of
the cursor is erased.
You cannot insert characters.
9 Press ENTER/YES to complete the
labeling procedure.
The name is stored in the system
memory.
Cursor
To cancel labeling
Press MENU/NO.
To check the Station Name of the
current station
Press UPPER DISPLAY.
Each time you press the button, the display
changes as follows:
n Preset Equalizer name n Clock
Station name N Volume N
To erase the name
Start over from step 1, then press CLEAR
repeatedly after step 4 to erase the name.
