Using the Menus
27
Options (Audio Menu)
MTS
Multi-Channel
TV Sound
Use the
F or f buttons to highlight one of the following options, then
press to select it.
Stereo:
Select when viewing a broadcast in stereo.
Auto SAP:
Select to have the TV automatically to a Second Audio
Program (SAP) when a signal is received.
Mono:
Select to reduce noise in areas of poor reception.
Speaker
Custom
selection of
audio output
source
Use the
F or f buttons to highlight one of the following options, then
press to select it.
On:
Select to listen to the sound from the TV speakers with or
without a separate stereo system.
Off:
Select to turn off the TV speakers and listen to the TV’s
sound only through external audio system speakers.
Audio Out
Use to control
the TV’s volume
through a stereo
Use the
F or f buttons to highlight one of the following options, then
press to select it.
Variable:
Adjust the volume through your TV.
Fixed:
Adjust the TV volume through a connected stereo.
Speaker
:
On
Audio Out
:
Fixed
Options
Select
End
Return
MTS : Stereo
To access the Options menu, first open the Audio menu by referring to the
following steps:
To Display
To Highlight
To Select
Press f to highlight Options, then press .
✍ Press for direct MTS settings (Stereo, Auto SAP, Mono).
✍ If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does not output
sound, change your Audio setting to Stereo or Mono.
✍ Audio Out settings can only be set when Speaker is set to Off.
