Press and hold the POWER button
of
the bluetooth receiving
device for 7 seconds or more to standby for pairing while the
unit
is
turned
off.
Notes
• Passcode*
of
this unit
is
fixed at "0000': "1234" or "8888:' Depending
on
the
Bluetooth receiving device, it may be necessary to input the passcode (in
this case,
"DODO':
"1234" or "8888"). This unit cannot be paired with a
Bluetooth receiving device whose passcode
is
not "0000': "1234" or "8888."
•
If
the Bluetooth receiving device requires a passcode, input "0000:'
>I-
Passcode may be called "Passkey:' "PIN code;' "PIN number:' or "Password:'
S
Press
and
hold
the
power
button
of
this
unit
for
7
seconds
or
mor~
to
enter
IJPairing
in
process:'
After about 1 second, the indicator will flash twice
but
keep
pressing the power button.
Notes
•
When
first power
on
this unit after initialize, this unit will enter the "Pairing
in process" automatically.
• The pairing information
is
initialized ifyou press and hold the power
button for
15
seconds. The indicator lights up for 5 seconds before the
initialization starts. Release the button immediately when the indicator
lights up.
When the indicator
of
this unit flashes quickly, stop pressing it.
This unit enters ((Pairing in process:'
This unit's indicator status will vary
as
follows, and pairing
is
established with the Bluetooth receiving device.
Continued
r==">.
us
11
