A SERVICE OF

logo

BIOS Setup Utility SY-D6IBA
56
3-8.1 IDE Device Controls
IDE Controls Setting Description Note
Disabled
IDE HDD Block Mode
Enabled Invokes multi-sector
transfer instead of one
sector per transfer. Not
all HDDs support this
function.
Default
mode 0-4 0 is the slowest speed
4 is the fastest speed
IDE
Ø Primary Master PIO
Ø Primary Slave PIO
Ø Secondary Master PIO
Ø
Secondary Slave PIO
Auto For better performance
and stability, we
suggest you use the
Auto setting to set the
HDD control timing.
Default
Disabled
IDE
Ø Primary Master UDMA
Ø Primary Slave UDMA
Auto Select Auto to enable
Ultra DMA Mode
support.
Default
Disabled Turn off the on-board
IDE
On-Chip PCI IDE
Ø Primary
Ø Secondary
Enabled Use the on-board IDE Default
3-8.2 Onboard SCSI Subsystem Controls
SCSI Subsystem
Controls
Setting Description Note
Disabled
Onboard PCI SCSI
Chip
Enabled Enables the on-board
SCSI function.
Also, allows you to
configure the
SCSISelect BIOS utility.
(Press <Ctrl-A> during
boot-up to enter the SCSI
BIOS utility.)
Default