26
Newport MkII Will produce 14 -16
GPH (54-60LPH)
NOTE: To toggle between Imperial
(gallons) and Metric Units (Liters)
push and hold Alarm/Disp for 5 sec-
onds.
Product Flow
Salinity
Salinity reads in parts per million. Sys-
tem rejects water higher than 750 PPM.
Anything below 500 is excellent.
Feedwater Pressure
Pressure range 90-115 PSI
(7-8 BAR)
Pressure will be higher in cold water and
lower in warm water. Extreme salinity
or temperature conditions may result in
operating pressures outside of the nomi-
nal range
Filter Condition Alarm occurs when
filters are partially clogged. When filters
are completely clogged system shuts
down and alarm sounds again
