BR89 User Manual ◄ 7
Tool sTickeRs & Tags
SAFETY TAG P/N 15875 (Shown smaller then actual size)
DANGERDANGER
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE
OPERATION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE
1. FAILURE TO USE HYDRAULIC HOSE LABELED AND CER-
TOOLS ON OR NEAR ELECTRICAL LINES MAY RESULT IN
DEATH OR SERIOUS INJURY.
BEFORE USING HOSE LABELED AND CERTIFIED AS NON-
CONDUCTIVE ON OR NEAR ELECTRIC LINES BE SURE THE
HOSE IS MAINTAINED AS NON-CONDUCTIVE. THE HOSE
SHOULD BE REGULARLY TESTED FOR ELECTRIC CUR-
2. A HYDRAULIC LEAK OR BURST MAY CAUSE OIL INJEC-
TION INTO THE BODY OR CAUSE OTHER SEVERE
A. DO NOT
CAUSE A LEAK OR BURST.
B. DO NOT
C.
DAILY FOR LEAKS. DO NOT
IMPORTANT
D. DO NOT LIFT OR CARRY TOOL BY THE HOSES. DO
NOT ABUSE HOSE. DO NOT USE KINKED, TORN OR
DAMAGED HOSE.
3. -
-
REVERSING CONNECTIONS MAY CAUSE REVERSE
4.
CENTER HYDRAULIC SYSTEMS. THIS MAY RESULT IN
5.
6. -
TECTION.
7.
IMPORTANT
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE
OPERATION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE
The safety tag ( 15875) at right is
attached to the tool when shipped from
the factory. Read and understand the
safety instructions listed on this tag before
attach it to the tool when not in use.
NOTE:
THE INFORMATION LISTED
MUST BE LEGIBLE AT ALL
TIMES.
ARE AVAILABLE FROM
YOUR LOCAL STANLEY
DISTRIBUTOR.
10180
Caution Decal
13842
BR89 Name Decal
