A SERVICE OF

logo

Technical Information
Model door maximum width door maximum
height
72110100/
72210100
38-5/8 (98.1 cm) 70-1/2 (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
installation.
Both tile and curve wall surrounds share the same
dimensions.
1-5/8" (4.1 cm)
at Midpoint
34"
(86.4 cm)
72-1/2"
(184.2 cm)
77"
(195.6 cm)
42"
(106.7 cm)
1-1/4"
(3.2 cm)
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
42" (106.7 cm) Min.
42-1/8" (107 cm) Max.
35-1/4"
(89.5 cm)
10" (25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
26"
(66 cm)
13"
(33 cm)
13"
(33 cm)
16"
(40.6 cm)
21"
(53.3 cm)
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm) O.D.
Drain Hole
4-1/2" D.
(11.4 cm)
Drain Cutout
Recommended Roofing
Nail Locations (4 total)
Product Diagram
ENSEMBLETM
ENSEMBLETM 42 (106.7 cm) SHOWER RECEPTOR AND WALL SURROUND
Page2of2
1017263-4-
E