A SERVICE OF

logo

Open as PDF
next previous
Technical Information
Model Door maximum
width
Door maximum
height
72110106 38-5/8″ (98.1 cm) 70-1/2″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown for roofing nail
installation.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
1-5/8" (4.1 cm)
at Midpoint
34"
(86.4 cm)
72-1/2"
(184.2 cm)
77"
(195.6 cm)
42"
(106.7 cm)
1-1/4"
(3.2 cm)
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
42" (106.7 cm) Min
42-1/8" (107 cm) Max
35-1/4"
(89.5 cm)
10" (25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
26"
(66 cm)
13"
(33 cm)
13"
(33 cm)
16"
(40.6 cm)
21"
(53.3 cm)
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm) OD
Drain Hole
4-1/2"
(11.4 cm)
D. Drain
Cutout
Recommended Roofing
Nail Locations (4 total)
1" (2.5 cm)
from Grout Line
1" (2.5 cm)
10"
(25.4 cm)
2" (5.1 cm)
10" (25.4 cm)
Backer board locations
Back Wall
End Wall
Note: Right and left end walls are the
same, only mirrored.
3-1/2"
(8.9 cm)
12" (30.5 cm)
Grab Bar
18" (30.5 cm)
or 24" (61 cm)
Grab Bar
12"
(30.5 cm)
Grab Bar
3-1/2" (8.9 cm)
Product Diagram
ENSEMBLETM
ENSEMBLETM 42″ (106.7 cm) SHOWER RECEPTOR AND WALL SURROUND WITH BACKER BOARDS
Page2of2
1065814-4-
A