Set up in Four Easy Steps
A unique overhead portable track system for the Voyager lift that
can be set up in less than 5 minutes by one person using no tools.
• Multi-Post Options The 2, 3 or 4 post options allow the
Easytrack to solve lifting and transferring problems
in nearly every room layout.
• Easy Set-Up The lightweight components and design
allow for quick, easy set-up by a single person in less
than five minutes.
• Non-Permanent Installation The unique floor-to-ceiling
spring-loaded design does not require permanent
installation or alterations to the ceiling or electrical,
thus saving the homeowner considerable money while
maintaining the décor of the home.
•
Portable The lightweight aluminum Easytrack can
be transported along with the Voyager lift providing
a temporary solution when traveling. An optional carry
bag is available.
•
Small Footprint The small feet of the Easytrack allow
use even in the smallest bedroom or bathroom where
a conventional floor lifter could not be maneuvered.
•
Easy-Glide Rail The design of the telescopic rail
allows caregivers to smoothly glide the person being
transferred without strain or risk of back injury.
•
Telescopic Rail Unlike fixed-length tracks, the Easytrack
can be extended to accommodate different locations,
eliminating the need for in-home surveys and
customization.
• Telescopic Post The Easytrack can be used with ceiling
heights from 7'-9'.
• Rotating Rail Connection This allows the rail or post
to be positioned at any angle as well as close to walls
or obstructions.
• Patented Safety Systems A number of unique safety
systems have been designed into the Easytrack to ensure
peace of mind. These include preventing the post from
losing grip if the floor or ceiling flexes, preventing the
post from being lowered if the rail is still connected and
preventing the rail from disconnecting from the post.
• Bubble Level A snap-on level is included for precise post
set-up.
Extend posts and rotate
to lock into place.
Fix one end of rail onto post.
Extend rail to required length
and fix rail onto second post.
Fix end cap to lock rail into
place.
