ENGLISH
70
Settings (General Setup 1)
TV Type
NTSC:
Select this mode if the unit is connected to an NTSC TV.
PAL (Default):
Select this mode if the unit is connected to a PAL TV.
<
You can select this setting using the NTSC/PAL button of the
remote control unit.
TV Display
Select the aspect ratio to match your TV.
Normal/PS (4:3 Pan & Scan mode):
When you connect a conventional TV to the system, this
setting displays a wide picture on the whole TV screen with a
portion (right and left sides of the picture) automatically cut
off.
Normal/LB (4:3 Letterbox mode) (Default):
When you connect a conventional TV to the system, this
setting displays a wide picture with bands displayed on the
upper and lower portions of the screen.
Wide (Widescreen mode):
Use this setting when you connect a widescreen TV to the
system. Be sure to set your widescreen TV to display “full
size”.
<
Some wide-screen discs that do not permit Pan & Scan mode
playback are automatically played in Letterbox mode.
<
Depending on the DVD, 4:3 Letterbox may be selected
automatically instead of 4:3 Pan & Scan and vice versa.
<
If WIDE is selected and a normal TV is connected, 16:9
content will appear distorted during playback (objects look
thin).
Angle Mark
ON (Default):
The angle mark appears on the screen when playing back
locations captured at multiple angles.
OFF:
The angle mark does not appear on the screen.
OSD Lang (Selecting the language for
onscreen display)
Select the desired language for onscreen menus from the
following:
English (default), French, Italian, German, Spanish,
Portaguese, Dutch, Korean, Chinese, and Japanese.
D
C
B
A
