SCPI Commands for the Counter
3–62
VX4101A MultiPaq Instrument User Manual
CALibrate[<channel>]:HYSTeresis
Command Response
CALIBRATE1:HYSTERESIS Performs the hysteresis linearization for channel 1
CAL2:HYST Performs the hysteresis linearization for channel 2
CALibrate[<channel>]:LFCOmp
Command Response
CALIBRATE1:LFCOMP Performs the low frequency compensation for channel 1
CAL2:LFCO Performs the low frequency compensation for channel 2
CALibrate[<channel>]:LINearity
Command Response
CALIBRATE1:LINEARITY Performs the linearization correction for channel 1
CAL2:LIN Performs the linearization correction for channel 2
CALibrate[<channel>]:ZERO
Command Response
CALIBRATE1:ZERO Performs the offset calibration for channel 1
CAL2:ZERO Performs the offset calibration for channel 2
CALibrate:DTI
Command Response
CALIBRATE:DTI Performs the DTI calculations.
CALibrate[3]:BIAS
Command Response
CALIBRATE3:SENSITIV N/A, Perform the sensitivity adjustment
