18
Limescale and contaminants in the rinsing water may block nozzles and
bearings on the spray arms.
Check outlet nozzles on the spray arms for blockages.
Unscrew the upper spray arm.
Remove the lower spray arm.
the waste water pump. The rinsing water does not get pumped out and covers
Disconnect the appliance from the power supply.
Scoop out water, use a sponge if required.
Using a spoon, prise off pump cover(as illustrated) until it clicks, then grip
out forwards.
Check inner compartment and remove any foreign objects.
Place cover in the original position, press down and engage.
Empty the dishwasher and secure loose parts.
Turn on the tap.
Close the door.
Switch on ON/OFF switch.
Select programme with the highest temperature.
The expected programme duration is indicated on the numerical display 8.
Programme sequence starts.
on the digital display.
Switch the appliance off (and turn the tap off).
Transport appliance upright only.
(This prevents residual water from running into the machine control and
damaging the programme sequence.)
If the appliance is in a room where there is a risk of frost (e.g. holiday home),
empty the appliance completely (see Transportation).
Turn off the tap, disconnect supply hose and drain water.
